Browsing Tag

Sparkle

Card Making Christmas Kaisercraft Sparkle

WIN One of 3 Card Packs

August 23, 2018

Show us your SPARKLE.

Today we are sharing a couple of cards that two of our design team members have created using the Sparkle collection.  You then will have the chance to share with us one of your creations.

First of all we have “CHRISTMAS JOY” by our new team member Lisa Amiet.

Papers: Sparkle Collection – P2586 Glint, P2591 Radiance, P2594 Luster.
KC PRODUCTS: 6×6″ Designer Template – IT473 Geo Lines, CT943 Collectables,
Square Card Pack – CD503 Black.
Other: Modelling Paste, Gauze, Paper Straw, Cardboard.

INSTRUCTIONS:

  1. Use Square black card as your base. Use template and modelling paste to stencil your card base.
  2. Fussy cut flowers from GLINT. 
  3. Adhere these to card base, ensuring they face outwards. 
  4. Scrunch up some gauze and glue to card.
  5. Cut one piece 9 x 9cm (3½” x 3½”) from RADIANCE. 
  6. Use cardboard to raise and add dimension to your card base. 
  7. Adhere flowers from collectables.
  8. Cut one piece 6.5 x 6.5cm (2½” x 2½”) from GLINT (reverse). 
  9. Use cardboard to raise from card and adhere using double sided tape.
  10. Use a paper straw, cut into 5cm (2”) pieces and adhere them to the centre of card.
  11. Cut sentiment from LUSTER, adhere to the centre of the card, over straws.

 

MAKING SPIRITS BRIGHT – by Cathy McGrath

Papers: Sparkle Collection – P2592 Auroral, P2590 Vivacity.
KC PRODUCTS: CT943 Collectables, Square Card Pack – CD503 Black, Cardstock – CD102 Licorice, Decorative Die – DD755 Lace Borders & DD705 Swirl Flourish, 

INSTRUCTIONS:

  1. Cut a 12.2cm x 12.2cm (5” x 5”) mat using AURORAL.
  2. Die cut two borders using licorice cardstock and a border die from lace borders die set. 
  3. Attach die cut borders to the back of AURORAL using craft glue and adhere all to card base using craft glue.
  4. Cut a 12.5cm x 4cm (4 ¾” x 1 ½”) strip from lace paper from the paper pad. Create a fishtail banner. Ink all sides with bark ink.
  5. Cut a 12.2cm x 5cm (5” x 2”) strip of AURORAL (reverse). Matte this using licorice cardstock. 
  6. Alter the edge using scalloped scissors (optional). 
  7. Adhere to card front using mounting foam.
  8. Die cut a small flourish from VIVACITY (reverse). 
  9. Adhere to the card using craft glue.Select three poinsettias from the collectables. 
  10. Adhere the largest using craft glue and the remaining two using mounting foam for extra dimension.
  11. Select a sentiment from the collectables and adhere to the card front using mounting foam.

 

Now its your time to share:
All you have to do is upload one of your favourite Kaisercraft Christmas cards that you have made in the comments below.  You will have the opportunity to win one of three Mini Card Making Packs shown below..

Even if you don’t win you still can purchase these products from your local retailer or head over to our online store and purchase a Sparkle Mini pack HERE.

We look forward to seeing your creations.

Post to Twitter

Alicia McNamara Card Making Christmas Sparkle

Stamped Sparkle Christmas Cards

August 17, 2018

Send some SPARKLE-ly love this Christmas.

There is never a better time than now to start making that stash of Christmas Cards – as before we know it, the Christmas season will soon be upon us.  

With so much going digital and paperless there is nothing better than opening up your letterbox and finding a home made card – something that someone has spent time creating especially for you – plus it’s a welcome change to the usual bills.


PAPERS:  Sparkle Collection: P2591 Radiance, P2589 Glistening, P2588 Illuminate,
P2587 Shiny, P2593 Aglow
KC PRODUCT:  CS333 Clear Stamps, CT943 Collectables, CD510 Black C6 Card Pack,
PL505 Latte Pearl Strips, FL631 Flourish Pack Shine, SS369 Sticker Sheet.

 

Today we share with you three cards that Alicia McNamara has created using using the Sparkle Coordinating Stamp Set.  

CS333 Clear Stamps

 

INSTRUCTIONS:

STEP ONE:
Stamp some clear stamped images of Large Christmas Tree, Small Christmas Trees and Baubles onto RADIANCE and GLISTENING. 

 

TIP:  Stamp or Emboss the image onto a patterned background for a different effect.

Fussy cut around each of these images.

 

STEP TWO:
Cut three 4″ X 6″ rectangles for the backgrounds from P2591 RADIANCE measuring 4×6 inches. 
Ink edges with Petal Pink Ink and mount onto base of cards with foam tape.

 

STEP THREE:
Cut three 4″ x 3.5″ rectangles from ILLUMINATE (reverse – reindeers).
Cut three 4″ x 2.5″ rectangles from GLISTENING.  

Position the black piece horizontally across the bottom half of each card. 
Layer the pink rectangle on top using foam tape.

Adhere a strip from the sticker sheet across the bottom
Repeat for on other two cards.

 

 

STEP FOUR:
 Add a sticker sheet to top and bottom of layered rectangles. 
Apply Latte Pearl Strips horizontally to layers on cards.

 

STEP FIVE:
Layer all stamped images onto SHINY (Reverse) and fussy cut around leaving a thin black border. 

 

STEP SIX:
Choose Collectables to compliment the stamped images. 
Tie organza ribbon onto the three baubles. 
Position collectables and stamped images onto cards with a variety of double-sided and foam tape.

Choose a Wooden Flourish for each card and ink with a Petal Pink Ink.  Glue to desired position.

                       

STEP 7:
Cut AGLOW (Reverse) to 3 rectangles measuring 4×6 inches for inside of cards. 
Stamp sentiment onto rectangle and then adhere to inside of card.

 

 Click HERE to download a set of these instructions if you would like to create these yourself.

Post to Twitter

Christmas Layouts Sparkle Videos

Sparkle Tutorial – December Magic

August 15, 2018

December Magic Layout
Today we are sharing a gorgeous layout from our Design Team member Rikki Graziani

“When I look at a collection for the first time, I break it down in a couple of ways…. What can be fussy cut? What can be layered and how can I get it to interact with a photo once I chose one. So with that in mind I wanted to make a sort of branch with the geometric background and cut out different pieces. Then what’s a tree without some leaves? The poinsettias are always a great one to fussy cut and layer with foam tape; they can easily be cut in a number of ways and even with the spare petals they can be tucked in and around to bulk out the flower. Then things to hang off the branch….. The snowflake and rhinestone strips are perfect for that to help draw your eye down and around the layout. And the decorations being white and foil draw your eye to the photo”

Geometric patterns are all the rage.  Team that with rose gold and this paper is so versatile.
P2592 Auroral (reverse)

Rikki has carefully cut away sections of this to make a feature for the top of her layout.

Watch the video below to see how she has created the rest of this layout or download the instructions by clicking on the image above.

 

Post to Twitter

Card Making Sparkle

How to Make a Shaker Card

August 14, 2018

CHRISTMAS IS TOO SPARKLY (said no one ever)

Continuing with the Sparkle theme in our Rose Gold Week,
today we are sharing How to make this cute Shaker Card by our design team member Cathy McGrath

PAPERS: Sparkle Collection – P2592 Auroral, P2590 Vivacity, P2594 Luster, P2589 Glistening.
KC PRODUCTS: CT943 Collectables, C6 Card Pack – CD510 Black, Decorative Die – DD508 Nesting Ovals

 

Watch the video below to see how you can make one of these for yourself or click on the above picture to download instructions.

 

 

Post to Twitter

Beyond the Page

Easy as 1 2 3 Christmas Decorations

August 13, 2018

Need an quick and easy project for yourself or the kids to do over the holidays?  
Why not make a set of your own Christmas Decorations – this project would even make a great present for your children to give to their teachers at the end of the year.

This month we have released a new Beyond the Page product – Geo Hanging Ornaments.  

And all you need are a few products – seriously!!!

SB2500 Geo – Ornaments

 

GC106 Bronze Cardstock

CT943 Sparkle Collectables

 

F644 Coconut Mini Paper Blooms

 

EASY AS 1, 2 3 INSTRUCTIONS:

STEP ONE:
Start with covering each of the wooden shapes with Glitter Cardstock.  

There are two ways you can do this – if you are handy with a craft knife you could  apply glue to the front of each shape and adhere shape to the back side of the glitter cardstock, then carefully cut around the edges.  
Otherwise, use a pencil and trace each shape onto the back of the glitter cardstock and cut out, then adhere to the front of the wooden frames.

STEP TWO:
Decorate each geo frame.
Layer a selection of die cuts from the SPARKLE  collectables pack onto each frame.  
Use foam tape between the layers to add dimension if you wish.  Adhere a flower or two to the sides of the frame.

STEP THREE:
Tie some string through the hole at the top and hang.

With our large range of Glitter Cardstock on offer you can easily adjust these to suit the colours you want to decorate your tree.

  

 

 

Post to Twitter